Specification parameter:

Type number: CWF450-63A162 power: 28W

Input voltage: AC90-265V frequency range: 50-60Hz

Output voltage: DC40-63V output current: 450mA

Efficiency: 90% PF value: 0.95

Working temperature: -30-50, working humidity: 10-90%RH

Storage temperature: -40-80

Structure size:

Power supply size: 162*30*21mm shell material: aluminum alloy

Protection level: IP67

Input wire: VDE H03VV-F 3G0.75m & M Brown Blue & Yellow / green (300mm)

Output wire: VDE H03VV-F 2 * 0.75m m Brown & Blue (300mm)

Application range:

LED tunnel lamp power, LED wash wall lamp power supply, LED power supply, panel lamp power source and constant current LED driver.

Product features:

1 this product is a separation scheme power supply, the use of constant current chip design, high conversion efficiency, low temperature rise, constant current high accuracy.

2 built-in anti electromagnetic interference filter circuit, good anti-jamming performance, high reliability.

3 small DC ripple, high efficiency, low standby power consumption, low heat, long service life.

4 products using well-known brands of raw materials, effectively ensure the quality of the product.

5 wide input voltage range, (90-265V) in accordance with the global standards.

6 good insulation performance, high resistance to electric strength. (pressure 3750V).

7 products with short circuit, overload, over-voltage and no-load protection function, automatic recovery after falling.

8.100% full load aging test.

9 all materials are not included (and not beyond the provisions of the limits) of the European limits / disable cadmium, chromium, lead, mercury, PBB, PBDE six kinds of toxic substances.

10 first class insulation performance is good, high frequency transformer 100% uses vacuum penetration.

11 aluminum alloy shell structure, the product does not rust, good heat dissipation, low temperature rise, and effectively to ensure product waterproof grade.

Note:

1 do not connect the input and output, so as to avoid the LED power supply.

2 LED waterproof power housing ground wire (FG) must be grounded, to ensure the safety; the ground (FG) can not be mistaken for the line.

3 LED power supply must be used in the right environment, in the harsh environment of the work may shorten the life of the power supply.

4 in order to achieve the best cooling effect, LED power supply is recommended for the installation of a good air circulation, or installed on the metal chassis.

5 please correct matching power source and light source, so as to avoid the lamp can't work or damage the lamp and power, cause damage